4 Handling the printer VJ-1624/1624W OPERATION MANUAL
4-2
4.1 Print flow chart
The following flow chart illustrates the procedure to perform printing with the printer.
Refer to each section as required.
Since VJ-1624 is equipped with Heaters, strictly comply with the following Warnings and Cautions.
WARNING
• Do not place any combustible materials on Platen while the heater is working.
There may be a risk of fire.
• Do not spill flammable liquid on Platen.
It may cause a fire.
CAUTION
• Do not touch Media guide while printing.
Media guide becomes very hot and you could burn yourself.
• Do not touch Media feed slot, Platen, and Media guide while Heater is working.
Media feed slot, Platen, and Media guide become very hot and you could burn
yourself.
• Ventilate the workplace.
Not doing so may cause nausea or a fire hazard.
1. Create print data.
Create print data with application software.
↓
2. Turn the power ON and set the media.
3.4 Loading media
4.2 Media
↓
3. Set up printing conditions.
4.3 Menu setups on Operation panel
↓
4. Perform printing.
4.4 Operating from Operation panel
To Next Page
Loading...
Need help?
General