3 Before using VJ-1624/1624W OPERATION MANUAL
3-2
3.1 Power cord set connection
This section explains power cord set connection.
WARNING
• Be sure to use the specified power cord set.
Using a power cord set other than the specified can cause an electric shock or fire.
• Use the power cord set compliant with the safety standards, power-supply voltage,
and plug shape of the country where the printer is used.
• Use a power cord set which is equipped with a protective earth, and securely
connect it to the outlet.
• Do not use a damaged power cord set.
It could lead to an electric shock or fire.
CAUTION
• Pay attention to the following points when handling the power cord set.
• Do not tamper with the power cord set.
• Do not put heavy objects on the power cord set.
• Do not bend, twist or pull the power cord set by force.
• Do not route the power cord set near heating appliances.
NOTE
• Contact your local MUTOH dealer if the power cord set is damaged.
Follow the procedure below to install the power cord set.
To Next Page
Loading...
Need help?
General