VJ-1624/1624W OPERATION MANUAL 5 Panel setup menu
5-7
Details of print mode
The set values of print quality that are registered in each print mode are as follows.
NOTE
• In the chart below, the print speed becomes faster as the condition is closer to the following cases.
• Having fewer number of passes
• Having lower resolution
• Printing direction is bidirectional
In actual printing, the selected effect affects the printing speed.
Effect menu
Effect menu
Sets up the Effect menu.
Set up this menu when you want to improve print quality by adjusting the set print mode.
NOTE
• The print quality may not be improved depending on the printing condition.
Print Mode Resolution Pass Direction
Quality 1 1440 x 1440dpi 16 times Uni (Uni-Direction)
Quality 2 1440 x 1440dpi 16 times Bi (Bi-Direction)
Quality 3 720 x 1440dpi 8 times Uni (Uni-Direction)
Quality 4 720 x 1440dpi 8 times Bi (Bi-Direction)
Graphics 1 720 x 720dpi 8 times Uni (Uni-Direction)
Graphics 2 720 x 720dpi 8 times Bi (Bi-Direction)
Graphics 3 720 x 720dpi 8 times Uni (Uni-Direction)
Graphics 4 720 x 720dpi 8 times Bi (Bi-Direction)
Banner 1 720 x 720dpi 4 times Uni (Uni-Direction)
Banner 2 720 x 720dpi 4 times Bi (Bi-Direction)
Banner 3 360 x 720dpi 2 times Uni (Uni-Direction)
Banner 4 360 x 720dpi 2 times Bi (Bi-Direction)
To Next Page
Loading...
Need help?
General