7 Troubleshooting VJ-1624/1624W OPERATION MANUAL
7-6
(4) Media jams frequently occur
NOTE
• If media other than the recommended one is used, correct media feeding cannot be assured.
(5) The media veers during printing
7.1.4 Printing-related troubleshooting
(1) Printing is partially stained or incomplete
NOTE
• Proper print quality may not be obtained with the media other than the recommended one.
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
2 Is the media used in an environment other than
the one specified?
Use the media in the specified environment.
4.2.2 Cautions
on handling media
3 Are you using the old media? Replace it with the new media.
6.1.2 Replacing
Roll Media
4 Are you using the creased or wrinkled media?
5 Does the media bend? Use the recommended media.
When using media other than the
recommended one, set the Vacuum Fan menu.
4.2.1 Media type
5.1.1.1.7
Vacuum Fan menu
No. Possible cause Remedy Reference
1 Are you using the recommended media? Use the recommended media.
4.2.1 Media type
2 Is the loading position of the media correct? Load the media correctly.
3.4.2 Setting
Roll Media
3 Is the roll media loaded correctly? Load the roll media correctly.
3.4.1 Loading
roll media
No. Possible cause Remedy Reference
1 Does the media include moisture? Replace it with the new media.
6.1.2 Replacing
Roll Media
2 Are you using the creased or wrinkled media?
3 Does the media bend? Use the recommended media.
When using media other than the
recommended one, set the Vacuum Fan menu.
4.2.1 Media type
5.1.1.1.7
Vacuum Fan menu
To Next Page
