MUTOH ValueJet VJ-1624 - Standard Micro Adjustment Pattern

3 Before using VJ-1624/1624W OPERATION MANUAL
3-88
7. Press the [Enter] key on Operation panel.
• Determines the setting.
• "Adj.2: Rough Pattern" is displayed on Operation panel.
3.6.1.3 Standard micro adjustment pattern
Perform micro adjustment when the degree of misalignment is small.
Print micro adjustment pattern and register the set values.
1. Display the Standard Adjust Print menu on Operation panel in the same way as Step 2 of "3.6.1.1
Standard confirmation pattern".
2. Press the [+] key or [-] key on Operation panel to select "Adj.3: Fine Pattern".