VJ-1624/1624W OPERATION MANUAL 3 Before using
3-87
NOTE
• 11 represents the current setting value.
5. "Pattern*: 6" ("Pattern*: 11" for VJ-1624W. Refer to the chart below for *.) is displayed on
Operation panel.
• The pattern name indicated by * differs depending on the set print mode.
Print modes and corresponding pattern names are listed as follows.
NOTE
• Refer to the following for Print mode.
5.1.1.1.1 Print Mode menu
6. Press the [+] key or [-] key on Operation panel to enter the number that you selected in Step 4.
NOTE
• When you press the [Cancel] key on Operation panel, the setting value is not entered and the
display returns to "Adj.2: Rough Pattern".
Print Mode Pattern name
Quality 1, 2 C
Quality 3, 4 B
Graphics 1, 2 E
Graphics 3, 4 D
Banner 1, 2 A
Banner 3, 4 A
To Next Page
Loading...
Need help?
General