MUTOH ValueJet VJ-1624 - Media Feed Compensation

VJ-1624/1624W OPERATION MANUAL 5 Panel setup menu
5-11
5.1.1.1.3 Media feed compensation
Sets up various settings on the media feed compensation.
(1) Init.Adj.Print menu
Performs Initial Adjust Print.
Setup item Setting Description
PF Init.Adj.Print Performs Initial Adjust Print.
• [Enter] key: shifts to the sub menu.
(1) Init.Adj.Print menu
Init.Adj.Change Sets up Initial Adjust Change.
• [Enter] key: shifts to the sub menu.
(2) Init.Adj.Change menu
Confirm Print Performs Confirm Print.
• [Enter] key: shifts to the sub menu.
(3) Confirm Print menu
Micro Adj. Print Performs Micro Adjustment Print.
• [Enter] key: shifts to the sub menu.
(4) Micro Adj. Print menu
Micro Adj.Change Sets up Micro Adjustment Change.
• [Enter] key: shifts to the sub menu.
(5) Micro Change menu
— • [Cancel] key: shifts to the previous menu.
5.1.1.1 User Type advanced setup menu
Setup item Setting Description
FeedLength 100mm to <250mm> to
500mm
Changes the length (feed length) of the media feed direction
for initial adjust print.
• [Enter] key:
Determines the setting.
"Printing" is displayed on Operation panel and initial adjust
print starts.
After printing, the printer enters Normal.
— • [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Media feed compensation