EasyManuals Logo

MUTOH ValueJet VJ-1624 User Manual

MUTOH ValueJet VJ-1624
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #298 background imageLoading...
Page #298 background image
7 Troubleshooting VJ-1624/1624W OPERATION MANUAL
7-10
7.2.2 Message type error display and remedies
This section describes message type errors and remedies.
Message type errors are displayed when certain failures occur during printer operation.
If a message type error occurs, the printer may display the following error messages on Operation panel
and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
NOTE
When an error occurs in the color measuring mode (numbers 26 to 37 below), clear the error and then
press the [Cancel] key more than two seconds to solve the message type error.
17 Power Off Turning the printer off.
Please wait a while.
Do not unplug Power cord set till Operation
panel is turned off.
3.2.2 Turning the
power OFF
18 Set Height to Low Displayed in the following cases.
• During power shutdown
• Before head cleaning
Set the head height to Low.
4.2.5.3 When
setting the head
height to Low
19 Change Head Gap High Set the head height to High.
Starts printing.
4.2.5.2 When
setting the head
height to High
20 Insert CleaningCart. Washing Print head.
Install Cleaning cartridge.
3.3 Filling ink
21 Insert InkCartridges Filling the ink.
Insert Ink cartridge.
3.3 Filling ink
22 User: Type ** OK? Initializing the media.
Please wait a while.
(** represents the set User type.)
3.4.3 Setting the
User Type Setting
23 Media Initial
No. Display Description Remedy Reference
1 Cover Open Front cover is open. Close Front cover.
3.4 Loading media
2 Mainte.CoverL Open Left Maintenance cover is
open.
Close Maintenance cover.
2.1 Names of parts
and functions
3 Mainte.CoverR Open Right Maintenance cover is
open.
Close Maintenance cover.
2.1 Names of parts
and functions
4 Lower the lever Media loading lever is raised. Lower Media loading lever.
2.1 Names of parts
and functions
5 Lever Up The media is not loaded. Load the media.
3.4 Loading media
6 Undefined Media Media detection has failed.
(Stops operation)
Reload the media.
3.4 Loading media
No. Display Description Reference

Table of Contents

Other manuals for MUTOH ValueJet VJ-1624

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MUTOH ValueJet VJ-1624 and is the answer not in the manual?

MUTOH ValueJet VJ-1624 Specifications

General IconGeneral
BrandMUTOH
ModelValueJet VJ-1624
CategoryPrinter
LanguageEnglish

Related product manuals