VJ-1624/1624W OPERATION MANUAL 4 Handling the printer
4-13
• White lines are printed over images.
The accuracy of media feeding may be improved with the following methods.
1. Adjust the media feed compensation value.
4.2.6.1 Procedure for the media feed compensation value
2. Fix the media firmly.
4.2.6.2 How to fix the media firmly
4.2.6.1 Procedure for the media feed compensation value
1. Display the Dist.Adj menu on Operation panel.
a. Press the [Menu] key on Operation panel.
• "Menu1: Setup>" is displayed on Operation panel.
• Operation panel shifts to the Setup menu display.
b. Press the [>] key on Operation panel.
• "Set1: User Type" is displayed on Operation panel.
c. Press the [Enter] key on Operation panel.
• "User: TypeXX" (XX is a number between 1 and 30) is displayed on Operation panel.
d. Press the [+] key or [-] key on Operation panel to select the user type to use.
e. Press the [Enter] key on Operation panel.
• "**>1: Print Mode" is displayed on Operation panel.
TIP
• The selected user type (Type 1 to 30) is displayed in "**".
5.1.1 User Type menu
f. Press the [+] key or [-] key on Operation panel to select "**>3: PF Adjust".
g. Press the [>] key on Operation panel.
• "PF1: Initial Print" is displayed on Operation panel.
• Proceed to Dist.Adj menu.
5.1.1.1.3 Media feed compensation
2. Performs Initial Adjust Print.
a. Press the [Enter] key on Operation panel.
• "Feed Length: 250 mm" is displayed on Operation panel.
To Next Page
