3 Before using VJ-1624/1624W OPERATION MANUAL
3-6
3.2 Turning the power ON/OFF
This section explains how to turn the printer ON/OFF.
3.2.1 Turning the power ON
Follow the procedure below to turn the power ON.
1. Press the [Power] key on Operation panel to turn ON the printer.
• The Power lamp on Operation panel lights up in blue.
• The printer starts the initial operation.
• When the initial operation is complete, the printer enters Normal.
NOTE
• If there is a problem during the initial operation, a message is displayed on Operation panel and
the printer may stop operating.
If operation stops, refer to "7 Troubleshooting" and deal with the problem.
3.2.2 Turning the power OFF
Follow the procedure below to turn the printer OFF.
1. Verify the following regarding the operational condition of the printer.
• Printing or other operations are not in progress.
• Operation panel display is Normal.
• The Low lamp on Operation panel lights up in green.
• The High lamp on Operation panel is turned off.
To Next Page
Loading...
Need help?
General