VJ-1624/1624W OPERATION MANUAL 3 Before using
3-7
NOTE
• If the High lamp on Operation panel lights up in green, the head height is set to High or Mid
(only for VJ-1624W).
Return the head height to Low before turning the power OFF.
4.2.5.3 When setting the head height to Low
2. Press the [Power] key on Operation panel to turn OFF the printer.
• The Power lamp on Operation panel is turned off.
NOTE
• If Operation panel is in the following status, the power is ON.
• The [Power] key is pressed in.
• The Power lamp lights up in blue.
Press the key once again to turn OFF the power.
• The printer turns the power OFF.
• "Power Off" is displayed on Operation panel.
NOTE
• If the head height is set to High or Mid (only for VJ-1624W), "Set Height to Low" is displayed
on Operation panel, and the printer stops the procedure to turn the power OFF.
To restart the procedure, return the head height to Low.
4.2.5.3 When setting the head height to Low
• All the lamps on Operation panel and the LCD monitor are turned OFF.
• The printer automatically turns the power OFF.
To Next Page
Loading...
Need help?
General