4 Handling the printer VJ-1624/1624W OPERATION MANUAL
4-30
4.4.5.2 Settings that can be changed or confirmed while printing
NOTE
• When you change a setting during operation, be sure to select "Backup" to save the setting that you
changed.
If the printer returns to Normal without "Backup" being selected, the changed setting is not saved.
• The following setting items are only for VJ-1624.
• Temperature
• Pre-heater
• Platen heater
•Dryer
4.4.6 Pausing printing
It is possible to pause to print during printing.
Follow the procedure below to pause or restart printing.
NOTE
• If the printing is paused, the print quality will not be guaranteed.
1. Check that the printer is in operating.
Setup item Setting Description Reference
Temperature
(VJ-1624 only)
Pre Checks the current temperature of Pre-heater. —
Platen Checks the current temperature of Platen
heater.
Dryer Checks the current temperature of Dryer.
Pre-heater
(VJ-1624 only)
Off / 30ºC to 50ºC Changes the temperature of Pre-heater.
5.1.1.1.4 Pre-heater
menu (VJ-1624 only)
Platen heater
(VJ-1624 only)
Off / 30ºC to 50ºC Changes the temperature of Platen heater.
5.1.1.1.5 Platen Heater
menu (VJ-1624 only)
Dryer
(VJ-1624 only)
Off / 30ºC to 50ºC Changes the temperature of Dryer.
5.1.1.1.6 Dryer menu
(VJ-1624 only)
PF Adjust -5.00% to 0.00 to 5.00% Change the feed adjustment value.
5.1.1.1.3 Media feed
compensation
Backup — • [Enter] key: Save the changed setting. —
— • [Cancel] key: The printer returns to
Normal.