VJ-1624/1624W OPERATION MANUAL 5 Panel setup menu
5-9
5.1.1.1.2 Adjust Print menu
Sets up when adjusting the printer for the optimum quality of image print.
NOTE
• This printer was adjusted at the factory shipment so that it obtains the optimum printing quality.
Adjust the quality if the print quality changes after the installation environment or the media is
changed.
• When newly setting or changing the user type setting after adjusting Standard adjust print, make
sure to adjust print.
• Since all print modes are adjusted at once after performing Custom adjust print, adjust print is not
required even after changing the print mode..
• When specifying a print mode which is different from the mode set in the user type setting, adjust
all print modes in the Custom adjust print first.
Standard Adjust Print menu
Adjusts only the print mode in the user type setting which is currently set.
Setup item Setting Description
Adjust Print Standard Adjusts only the print mode in the user type setting which is
currently set.
Standard Adjust Print menu
Custom Perform adjustment for all print modes.
Custom Adjust Print menu
— [Cancel] key: shifts to the previous menu.
5.1.1.1 User Type advanced setup menu
Setup item Setting Description
Adjustment Confirmation pattern Print the test pattern for the alignment.
Check before adjusting.
3.6.1.1 Standard confirmation pattern
Rough adjustment pattern Perform this when the degree of misalignment is big.
Print Adjust pattern and enter the set value.
3.6.1.2 Standard rough adjustment pattern
Micro adjustment pattern Perform this when the degree of misalignment is small.
Print Adjust pattern and enter the set value.
3.6.1.3 Standard micro adjustment pattern
— • [Cancel] key: shifts to the previous menu.
5.1.1.1.2 Adjust Print menu
To Next Page
Loading...
Need help?
General