3 Before using VJ-1624/1624W OPERATION MANUAL
3-110
3.7 Connecting the printer to PC
This section explains how to connect the printer and a PC.
3.7.1 System requirements
The operation systems the printer driver for this printer is compatible with are as follows.
NOTE
• The required memory varies depending on the application software or the print data type.
• A large hard disk and memory are recommended.
3.7.2 Preparing cables
The printer is equipped with a network interface for connecting with a PC.
You need a network interface cable to connect a PC with this printer.
Prepare the cable depending on the PC that it will be connected to.
TIP
• About connecting a network interface cable, refer to "3.7.3 Connecting a network interface cable".
• For the recommended cable specifications, refer to "8.2 Interface specification".
3.7.3 Connecting a network interface cable
This section explains how to connect a network interface cable.
Follow the procedure below to connect this printer to your PC.
NOTE
• When connecting the printer and computer via the hub, use a straight cable.
• When connecting the printer and computer Peer-to-Peer, use a crossover cable.
1. Turn OFF both the printer and PC.
Operating system Windows 7, Windows Vista, Windows XP
To Next Page
Loading...
Need help?
General