3 Before using VJ-1624/1624W OPERATION MANUAL
3-98
2. Press the [+] key or [-] key on Operation panel to select "Adj.2: Rough Pattern".
3. Press the [Enter] key on Operation panel.
• For VJ-1624, "Warming Up Skip ->E" is displayed on Operation panel.
(This is not displayed for VJ-1624W since it does not perform warming up.)
CAUTION
While "Warming Up" is displayed, do not touch Platen and Media guide.
They become very hot and you could burn yourself.
NOTE
• You can start printing during warming up.
4.4.7 Starting printing during warming up (VJ-1624 only)
• Starts a rough adjustment pattern printing.
(VJ-1624 starts printing after warming up is complete.)
To Next Page
Loading...
Need help?
General