3 Before using VJ-1624/1624W OPERATION MANUAL
3-102
NOTE
• 11 represents the current setting value.
5. "Pattern A: 6" ("Pattern A: 11" for VJ-1624W. Refer to the chart below for *.) is displayed on
Operation panel.
6. Press the [+] key or [-] key on Operation panel to enter the number that you selected in Step 4.
NOTE
• When you press the [Cancel] key on Operation panel, the setting value is not entered and the
display returns to "Adj.2: Rough Pattern".
7. Press the [Enter] key on Operation panel.
• Determines the setting.
8. Enter the values for patterns B to F in the same way.
• Press the [Enter] key to set the value.
• Once all set values have been entered, press the [Enter] key to register the set values of patterns
A to F.
• "Adj.2: Rough Pattern" is displayed on Operation panel.
To Next Page
Loading...
Need help?
General