VJ-1624/1624W OPERATION MANUAL 4 Handling the printer
4-23
4. The setting in the blinking part on LCD monitor of Operation panel can be changed.
Press the [+] key or [-] key on Operation panel to change the setting.
5. To save the changed setting, press the [Enter] key on Operation panel.
• The setting is saved and the next setup item is displayed.
NOTE
• If you press the [Cancel] key without pressing the [Enter] key after changing a setting, the
changed setting will not be saved.
6. Press the [Cancel] key on Operation panel to exit from the setup.
To Next Page
Loading...
Need help?
General