VJ-1624/1624W OPERATION MANUAL 5 Panel setup menu
5-21
For media detection settings, refer to the following.
5.1.4 Media Initial menu
NOTE
• When the media is loaded as shown in the illustration and not using media detection, the printer
may print on between the right edge of Platen and center of the media. If this happens, adjust the
print starting position in Origin menu.
5.1.8 Origin menu
(1) Media Width menu
NOTE
• Setting a larger value than the media width set in the Media Width menu may cause ink to leak on
the media or printer.
No. Name
1 Roll media
2 Media width (when not using media detection)
3 Media loading mark
4 Platen
Setup item Setting Description
MediaWidth 210mm to <1000mm> to
1,625mm
Set the media width.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type advanced setup menu
1
22
3 4