NCR 74 OFX (7874) - Code 128 Minimum and Maximum Tag Length; Code 128 Stitch; Code 128 Tone; Code 128 Tone Frequency

Chapter 5: Programming 5-71
Code 128 Tone Frequency
24468
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 1, Save and Reset
702 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 0, Save and Reset
781 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 3, Save and Reset
868 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 2, Save and Reset
961 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 5, Save and Reset
1071 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 4, Save and Reset
1187 Hz
Programming Mode, Hex 7, Hex 4, Hex 1, Hex 7, Save and Reset
570 Hz Programming Mode, Hex 7, Hex 4, Hex 1, Hex 6, Save and Reset
633 Hz
Setting
Default

Code 128 Tone
24384
Selection Programming Tag Sequence
Disable Programming Mode, Hex 7, Hex 0, Hex 2, Hex 0, Save and Reset
Enable Programming Mode, Hex 7, Hex 0, Hex 2, Hex 1, Save and Reset

Code 128 Minimum and Maximum Tag Length
24954
Selection Programming Tag Sequence
v = 1-3 (default is 3)
w = 1-9 (default is 9)
x = 1-3 (default is 3)
y = 1-9 (default is 9)
Scan Default Tag
Length Programming Mode, Hex 7, Hex 2, a, v, w, x, y, Save and Reset
where a = Ø (Range of lengths) or 1 (Specific Length)
Default

Code 128 Stitch
24386
Selection Programming Tag Sequence
Disable Programming Mode, Hex 7, Hex 0, Hex 9, Hex C, Save and Reset
Enable Programming Mode, Hex 7, Hex 0, Hex 9, Hex D, Save and Reset
