NCR 74 OFX (7874) - Reset Tallies

5-120 Chapter 5: Programming
 ThescannerspeaksʺLoadprogramin3seconds...2...1...0...ʺ.Thescannerresets
afterthismessage.

Thescannerbeepsandatriplebeepofascendingfrequencyfollows.

TheLEDsblinkfromlefttorightwhileinflashmode.Thescannerreboots
afterasuccessfulfirmwaredownload.

Thescannerbeepsandatriplebeepofascendingfrequencyfollows.

Thescannergivesoffalowfrequencytriplebeep,whichindicatesthatthe
FlashDrivecanbesafelyremoved.
11.
UnplugtheflashdrivefromthescannerʹsUSBperipheralport.Thescannerthen
givesoffadescendingtriplebeepsound,whichindicatesasuccessfulshutdown
oftheFlashDriveʹsfirmware.
Reset Tallies
Thisfunctionclearsthetalliesperformedandsavedinthescanner.
1.
SelecttheNCRRealScanFlashDrivePrepToolicon.The followingwindow 
displays.

2.
Inserttheflashdrivetobeused.The applicationdetectstheflashdriveinstalled.
3.
SelectSubmit.Thefollowingwindowdisplays.
