NCR 74 OFX (7874) - Enable UPC NS5 Coupon; GS1 Databar AI 8110 Coupons; EAN-13 98 Coupons; Expand E to EAN-13 Directly

Chapter 5: Programming 5-85
Enable UPC NS5 Coupon
24964
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 1, Hex D, Save and Reset
Enable Programming Mode, Hex 7, Hex 1, Hex C, Save and Reset
Disable
Setting
Default

GS1 DataBar AI 8110 coupons
GS1 DataBar 8110 Specific Disable
25590
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 1, Hex 1, Save and Reset
Don't Disable Programming Mode, Hex 7, Hex 1, Hex 0, Save and Reset
Disable
Setting
Default

GS1 DataBar 8110 Specific Enable
25591
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 1, Hex 3, Save and Reset
Don't Enable Programming Mode, Hex 7, Hex 1, Hex 2, Save and Reset
Enable
Setting
Default

EAN–13 98 coupons
24967
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 1, Hex 9, Save and Reset
Enable Programming Mode, Hex 7, Hex 1, Hex 8, Save and Reset
Disable
Setting
Default

EAN–13 99 coupons
24968
Selection Programming Tag Sequence
Programming Mode, Hex 7, Hex 1, Hex B, Save and Reset
Enable Programming Mode, Hex 7, Hex 1, Hex A, Save and Reset
Disable
Setting
Default

Expand E to EAN–13 Directly
25336
