NCR 74 OFX (7874) - Parameters Upload

5-108 Chapter 5: Programming
9. PlugtheFlashDriveinthescannerʹsUSBperipheralport.
Thescannergivesoffatriplebeepofascendingfrequency,whichindicatesthat
theUSBperipheralportrecognizedtheFlashDriveandwasabletoenumerate.
ThetriplebeepsoundsoffregardlessofthecontentsoftheFlashDrive.If
the
scannerfailstogiveoffthetriplebeep,thisindicatesaUSBperipheralportfailure
ortheUSBperipheralportwasnotabletocommunicatewiththeFlashDrive.
Thescannersoundsoffalowfrequencytriplebeep,whichindicatesthattheFlash
Drivecannowbesafelyremoved.
10. UnplugtheFlashdrivefromthescannerʹsUSBperipheralport.
Adescendingtriplebeepsoundsoff.,whichindicatesasuccessfulshutdownof
theFlashDriveʹsfirmware.
Parameters Upload
Thisfunctionuploadsthescannerconfigurationfromthescannertotheflashdrive.
1.
SelecttheNCRRealScanFlashDrivePrepToolicon.The followingwindow 
displays.

2.
Inserttheflashdrivetobeused.The applicationdetectstheflashdriveinstalled.
3.
SelectSubmit.Thefollowingwindowdisplays.
