NCR 74 OFX (7874) - Service Clearance

Chapter 2: Site Preparation 2-11
Service Clearance
AlthoughmanyoftheRealScan74componentsareaccessedwithoutremovingthe
unitfromthecheckstand,serviceclearancemustbeprovided.Clearanceisalso
requiredforcleaningtheunit.Refertothefollowingillustration fortherequired
clearances.
A
A
B
Item Flow
Area
25351
A = 20.32 cm (8.00 in) minimum if checkstand structure is not removable for servicing.
2.54 cm (1.00 in) minimum if checkstand structure is removable for servicing.
B = 30.73 cm (12.1 in) minimum if checkstand structure is not removable for servicing.
13.59 mm (5.35 in) minimum if checkstand structure is removable for servicing.
Mounting surface for keyboard must be
removable for the following.
• Servicing the unit
• Replacing the vertical window
