NCR 74 OFX (7874) - Page 217

Chapter 5: Programming 5-109
4. SelectOK.Thefollowingwindowdisplays.

5.
OntheTargetScannertab,select7874asthetargetscanner.
6.
OnthePARAMETERSgroupbox,selecttheUpdatescannerwith:checkbox.
7.
SelecttheEEPROMfromthedropdownmenu.
Note: IftheExtractfromscannerto:groupboxisenableduponselectingthe
Updatescannerwith:checkbox,thefollowingerrormessagedisplays.
