NCR 74 OFX (7874) - Page 234

5-126 Chapter 5: Programming
ThefollowingwindowdisplaysafterselectingEEPROM.

8.
SelectOK.TheConfirmbuttonisnowenabled.
9.
SelectConfirm.Thefollowingwindowdisplays.

ThefollowingwindowdisplaysifEEPROMwaspreviouslyselected.

Note: Allothersettings;includingsettingsinothertabs,aredisabledafter
selectingConfirm.
10.
SelectthePrepFlashDrivebutton.Theapplicationthenprepstheflashdrive
pluggedin.Thefollowingwindowdisplaysaftersuccessfullypreppingtheflash
drive.

11.
Right‐clicktheSafelyRemoveHardwareicononthesystemtraytosafelyremove
theflashdrive.ASafetoRemoveHardwareballoonmessagedisplaysnearthe
systemtray.