NCR 74 OFX (7874) - Page 49

Chapter 3: Installation 3-7
f) Attachtheverticalcoilaroundtheverticalwindowandroutetheverticalcoil
cableonthetowerasshown.
25657

6. ReplacetheBezel.
a) AlignthetopedgeoftheTowerCabinetwiththetopedgeoftheFrontBezel.
25571

b) Ensuretoroutethehorizontalcoilwiresunderthenotchfoundonthebottom
oftheFrontBezel.Thescannerwillhavescaleissuesifthewiresarenot
routedproperlyundertheFrontBezel.
25911
Correct Wrong
horizontal wires properly
routed under the bezel
horizontal wires not properly
routed under the bezel
