NCR VOYIX CX7 User Manual

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
107
Configuring Cash Drawer Switch Polarity
Configuring the cash drawer switch polarity depends on the platform software package
used. For more information, refer to:
l
Gen3 below
l
RPSW on page109
l
RPSL on page111
l
NCRPSW/NCRPSL on page112
Gen3
Hospitality (HSR) cash drawers all use 12V coils with Normally Open detection switches.
By default, the Gen3 Hospitality platform software open/close sense settings is Normally
Open. To use a drawer with Normally Closed detection switches (for example, Retail 24V
drawer), the sense settings can be reversed through registry settings.
Note
Gen3 does not support Printer Cash Drawers.
For 64-bit operating systems
To change the sense settings for a 64-bit Operating System, configure the following
registry values.
Normally
Open
Switch
Polarity
(Default)
Normally Closed
Switch Polarity
Registry Action Action
Terminal
Cash
Drawer 1
HKLM/Software/Wow6432Node/Radiant/
Platform/CashDrawer/ReverseOpenDetect1
Delete the
DWORD
registry
value or set
the value of
the
DWORD to
0.
1. Create a
new
DWORD
registry
value.
2. Set the
value of the
new
DWORD to
1.
Terminal
Cash
Drawer 2
HKLM/Software/Wow6432Node/Radiant/
Platform/CashDrawer/ReverseOpenDetect2

NCR VOYIX CX7 Specifications

General

Brand	NCR
Model	VOYIX CX7
Category	Touch terminals
Language	English