Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
130
Projected Capacitive (PCAP) Touchscreen
The NCR CX7 All-in-One POS (7772) has a Projected Capacitive (PCAP) Touchscreen that
has the following features:
l
Benefits of normal capacitive touchscreens
l
Fast processing of information
l
High sensitivity (use conductive pencils, with hands, and with thin gloves)
l
Multi-touch capability (10-finger)
l
High resolution
l
Improved legibility and display brightness due to optimal light transmission
In addition, the active surface of PCAP touchscreens is not directly touched and does not
wear off by normal use because it is located on the back side of the touchscreen, instead
of the front side. Therefore, the NCR CX7 All-in-One POS (7772) can be used in public or
in severe environmental conditions.
Using the PCAP Touchscreen
To use the PCAP touchscreen, do any of the following:
l
Use a single finger to resemble the left mouse button.
l
Use two fingers to zoom IN (fingers brought together) or zoom OUT (fingers pulled
apart).
l
Use a circular motion with your finger to rotate an element on the screen. This
function must be supported by either the Operating System or the application.