Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
198
BIOSSetup
Administrator Password
The administrator password to enter the BIOSSetup menu is NCR.
Entering Setup
1. Connect an alphanumeric USB keyboard to the terminal.
2. Apply power to the terminal.
3. When you see the NCR logo displayed, press [Del] or [F2].
Selecting Menu Options
The following keyboard controls are used to select the various menu options and to make
changes to their values.
l
Use the arrow keys to select (highlight) options and menu screens.
l
Use the [Enter] key to select a submenu.
l
Use the [+] and [-] keys to change field values.
l
To view help information on the possible selections for the highlighted item, press
[F1].
l
To save the changes, move the cursor to the Save and Exit Menu, select Save
Changes & Reset, and press [Enter].
To Next Page
Loading...
Need help?
General
