Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
136
Cleaning the CX7 Cabinet
1. Disconnect the unit from the AC outlet before cleaning.
2. Wipe the cabinet using a non-abrasive cloth (microfiber cleaning cloth or cloth
towel) dampened with soap and water solution.
Warning
Do not use alcohol (methyl, ethyl, or isopropyl) or any strong dissolvent. Do
not use thinner or benzene, abrasive cleaners (powders), abrasive cleaning
materials (scrub brush, scouring pad), or compressed air. Do not use any
other types of cleaners such as vinegar, solvents, degreasers, or ammonia-
based cleaners. These can damage the unit.
Warning
Avoid getting liquids inside the unit. If liquid does get inside, have a
qualified service technician check it before you power it on again.
3. Wipe the cabinet using a clean and dry lint-free cloth.
4. Remove external dust around the cooling vents.
To Next Page
Loading...
Need help?
General
