NCR VOYIX CX7 - Rpsl; Javapos; Configuring through Fitclient le Utility; Configuring through Config.xml Settings

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
111
RPSL
By default, the RPSL open/close sense setting is Normally Closed. RPSL printer-cash
drawer polarity settings can be configured in either of two ways:
l
through the FitClient LE utility
l
through the config.xml settings
JavaPOS
Configuring through FitClientLEutility
To change the sense settings in the FitClientLEutility, configure the value of the following
parameters.
Normally Open
Switch Polarity
Normally Closed
Switch Polarity
(Default)
Parameter Name Parameter Value Parameter Value
Printer Cash Drawer Invert CashDrawer Status True False
Configuring through config.xml settings
To change the sense settings in config.xml, go to
/usr/local/NCRRetail/jpos/res/config.xml and configure the following
registry values.
Normally Open
Switch Polarity
Normally Closed
Switch Polarity
(Default)
Registry Name Value Value
Printer Cash Drawer InvertCDPolarity T F