NCR VOYIX CX7 - CX Display Touch Tool

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
242
CX Display Touch Tool
In CX terminals with multiple touch displays, Windows may have difficulty assigning the
touch devices to the correct display. The CX Display Touch Tool is used to assign the touch
device to its correct display. The tool sets the Windows display to Extended Desktop and
assigns detected touch interfaces to the corresponding display.
The tool supports the following CX terminals:
l
NCRCX3 POS(7776)
l
NCRCX5 POS (7773)
l
NCRCX7 POS(7772)
The tool is located in the following
location:https://www5.ncr.com//support/support_drivers_
patches.asp?Class=External/CXDisplay%5CTouch%5CTool%5CDisplay
Refer to the Readme document for the installation procedure.