NCR VOYIX CX7 - SLES 15 SP4 Software RAID Gold Master Image

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
169
SLES 15 SP4 Software RAID Gold
Master Image
The following procedure incorporates software RAID into an NCR supported terminal
running SLES 15 SP4 distribution. The software RAID configuration is set to RAID1 mode.
Note
For more information about RAID, refer to SLES 15 SP4 | Storage
Administration Guide | Configuring software RAID for the root partition
(suse.com).
RAIDpartitioning is done by using the SLES Expert Partitioner during installation of the
OS.
Note
The succeeding screenshots are from an NCR terminal with two 480GB hard
disks:
l
nvme0n1—disk 1
l
nvme1n1—disk 2
1. In the Suggested Partitioning screen, from the Expert Partitioner dropdown list,
select Start with Current Proposal.