Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
96
Hardware Installation
Installation Restrictions
l
The NCR CX7 All-in-One POS (7772) conforms to all applicable legal requirements.
To view the compliance statements see the NCR POS Terminals Safety and
Regulatory Information (B005-0000-1589).
l
Install the CX7 near an electrical outlet that is easily accessible. Use the power cord
as a power disconnect device.
l
Do not permit any object to rest on the power cord. Do not locate the CX7 where the
power cord can be walked on.
l
Use a grounding strap or touch a grounded metal object to discharge any static
electricity from your body before servicing the CX7 terminal.
Warning
This unit contains hazardous voltages and should only be serviced by qualified
service personnel.
Caution
Do not connect or disconnect the transaction printer while the terminal is on. This
can result in system or printer damage.
Ergonomic Workplace
The NCR CX7 All-in-One POS (7772) has a high–brightness LCD with an anti–glare
screen. For best results, please observe the following when considering the terminal
workplace:
l
Avoid direct–glaring and reflective–glaring light. Locate the terminal in a
controlled luminance surrounding. When installed next to windows position the
terminal so it does not reflect the outside light.
l
If possible, avoid reflective glaring caused by electric light sources.
l
Position the terminal for ideal viewing angles.
To Next Page
Loading...
Need help?
General
