NCR VOYIX CX7 - Verifying Intel AMT Using Meshcommander

Confidential and proprietary information of NCRCorporation.
Unauthorized use, reproduction and/or distribution is strictly prohibited.
220
Verifying Intel® AMT Using MeshCommander
1. Download the MeshCommander tool from
https://www.meshcommander.com/meshcommander and install it on another
computer.
2. Open the MeshCommander tool.
3. Click the Add Computer button to add a new computer.
a. In the Add Computer window, enter the following:
l
IP Address
l
Username — typically admin
l
MEBx Password — as set up in Configuring Intel® AMT Settings in
Intel® MEBx Menu on page217
b. Click OK.