Installation
IntraMail for Aspire System Guide
Chapter 1: Quick Setup
◆
1
1
Chapter 1:
Quick Setup
Installation
Installing the IntraMail PCB
Installing the IntraMail PCB
Removing the Front Cover
Before installing the IntraMail PCB, you must remove the Aspire S front cover. With the cover removed, you
can check the CPU PCB LEDs prior to powering down the cabinet.
Step 1
Loosen the front cover screws
(Figure 1: Loosening the Front Cover Screws)
.
- Loosen the 4 front cover captive screws.
Figure 1: Loosening the Front Cover Screws
0893130-1
screws
screws
Front Cover
To Next Page
Loading...