NEC Aspire S IntraMail - 47-06 Program Entry

Program 47: IntraMail
47-06: Master Subscriber Mailbox Options
216 ◆ Chapter 3: Programming IntraMail for Aspire System Guide
47-06 Program Entry
47-06: Master Subscriber Mailbox Options Program Entry
(Entry Range) [Default Setting]
CALL1 + #*#* + Password (12345678) + HOLD + 4706 + Option.
■ This selects the option chosen for Master Subscriber Mailbox 1.
There are 16 available Master Mailboxes (1-16).
01 Number of Messages (0-99) [20]
02 Message Playback (0=FIFO, 1=LIFO) [0]
LK1=FIFO, LK2=FIF0
03 Auto Erase/Save (0=Erase, 1=Save) [1]
LK1=Erase, LK2=Save
04 Message Retention (1-90 Days, 0=Indefinite) [0]
05 Rec Conv Beep (1=Yes - enabled, 0=No - disabled) [1]
LK1=No, LK2=Yes
06 Update MW Lamp (1=Yes - enabled, 0=No - disabled) [1]
LK1=No, LK2=Yes
07 Auto-ATT DND (1=Yes - enabled, 0=No - disabled) [0]
LK1=No, LK2=Yes
08 Forced UTRF (1=Yes - enabled, 0=No - disabled) [0]
LK1=No, LK2=Yes
09 Auto Time Stamp (1=Yes - enabled, 0=No - disabled) [0]
LK1=No, LK2=Yes
10 System Admin (1=Yes - enabled, 0=No - disabled) [0]
LK1=No, LK2=Yes
11 Dialing Option (1=Yes - enabled, 0=No - disabled) [0]
LK1=No, LK2=Yes
12 Next CR Mbox (1-16, CLEAR=No entry) [1]
13 Directory List (1-8=Lists 1-8, 0=No list, *=All lists) [0]
Press this: To do this:
Editing
HOLD
Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
-1 +1
Scroll backwards (-1) or forwards (+1) through the list of available entries.
←←
←←
→→
→→
When editing an entry, moves the cursor left or right.
CONF
When editing an entry, delete the character to the left of the cursor.
CLEAR
When editing an entry, CLEAR erases the entire entry from the display.
Line Keys (LK)
Where indicated, press a line key to enter a specific value for the selected option.
Navigation
FLASH
FLASH + Mailbox number + FLASH selects a new mailbox number
MSG or back
Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
➔
➔
Scroll consecutively backwards or forwards through selected Option or Series.
select
Selects currently displayed Option or Series