Flexible Mailbox Numbering Plan
84 ◆ Chapter 2: Features IntraMail for Aspire System Guide
2-Digit Extension Numbering Example
The following example assigns a 2-digit extension number (26) to station port 6 and enables the Subscriber
Mailbox for extension 26. It also changes the * and # digits in the active Dial Action Table to allow Quick
Message and Remote Logon to the new 2-digit extension.
Step 1 Enable 2-digit extension numbers 20-29.
1.1 11-01-01: System Numbering
- In 11-01-01: Digit for the digit 2x, enter 2.
- In 11-01-01: Type for the digit 2x, enter 2.
✔By default, the digit 2 is set up as a 3-digit extension number (200-299.
Step 2 Change the extension number for port 6 to 26.
2.1 11-02-01: Extension Numbering
- For extension port 6, enter 26.
✔By default, extension port 6 is assigned to extension 306.
Step 3 Change the mailbox number to match the new extension number.
3.1 47-02-02: Mailbox Number on page 200.
- For mailbox 6, assign mailbox number 26.
✔By default, mailbox 6 is assigned to mailbox number 306.
Step 4 Modify the Dial Action Tables to accommodate the new numbering.
4.1 47-13-01: Dial Action Table Actions on page 236
- Make key 2 (digit 2) Action = UTRF (2) and Data = XX.
- Make key 11 (*) Action = REC1 (3) and Data = IXX.
- Make key 12 (#) Action = LOGON (5) and Data = IXX.
✔By default:
Key 2 is undefined.
Key 11 is REC1 to IXXX.
Key 12 is LOGON to IXXX.
Operation
N/A
IntraMail Does Not Support 2-Digit Extension Numbers 10-16
When setting up 2-digit extension numbering in Aspire S with IntraMail, do not use extensions 10-16.
Although you can set up this application in 11-01-01: System Numbering and 11-02-01: Extension Num-
bering, Subscriber Mailboxes assigned in 47-02-02: Mailbox Number will not function. This is because
mailboxes 1-16 are reserved for Routing Mailboxes and cannot be reassigned.
To Next Page
Loading...