EasyManua.ls Logo

NEC Aspire S IntraMail - 47-08 Program Entry; 47-08-04: Fax Detection

NEC Aspire S IntraMail
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program 47: IntraMail
47-08: Call Routing Mailbox Options
220 Chapter 3: Programming IntraMail for Aspire System Guide
47-08-04: Fax Detection
(Fax Detection)
Use this option to enable or disable Fax Detection for the Call Routing Mailbox. In enabled, the IntraMail
Automated Attendant (when using this Call Routing Mailbox) will detect incoming fax CNG tone. The fax
call will then route to the company fax machine according to the setting of 47-01-06: Fax Extension on
page 195. If disabled, the Automated Attendant will not detect incoming fax calls.
See Fax Detection on page 80 for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
47-08 Program Entry
47-08: Call Routing Mailbox Options
(Entry Range) [Default Setting]
CALL1 + #*#* + Password (12345678) + HOLD + 4708 + Option.
This selects the option chosen for Call Routing Mailbox 1.
There are 16 available Routing Mailboxes (1-16).
01 Dial Action Table (1-16) [1]
02 Scrn Trf Timeout (0-255) [15]
03 Dialing Timeout (0-99) [5]
04 Fax Detection (1=Yes - enabled, 0=No - disabled) [0]
LK1-No, LK2=Yes
Press this: To do this:
Editing
HOLD
Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
-1 +1
Scroll backwards (-1) or forwards (+1) through the list of available entries.
When editing an entry, moves the cursor left or right.
CONF
When editing an entry, delete the character to the left of the cursor.
CLEAR
When editing an entry, CLEAR erases the entire entry from the display.
Line Keys (LK)
Where indicated, press a line key to enter a specic value for the selected option.
Navigation
FLASH
FLASH + Mailbox number + FLASH selects a new mailbox number
MSG or back
Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
Scroll consecutively backwards or forwards through selected Option or Series.
select
Selects currently displayed Option or Series

Table of Contents

Related product manuals