Program 47: IntraMail
47-10: IntraMail Trunk Options
IntraMail for Aspire System Guide Chapter 3: Programming ◆ 223
3
47-10: IntraMail Trunk Options
Description
Use 47-10: IntraMail Trunk Options to assign IntraMail options for each trunk. Currently, only 47-10-01:
Answer Table Assignment is available. See the following for more:
■ Automated Attendant on page 47.
Options
47-10-01: Answer Table Assignment
(Answer Table)
Use this option to assign an IntraMail Answer Table to each Direct Inward Line (DIL) the Automated Atten-
dant should answer. The Automated Attendant follows the routing specified by the selected Answer Table.
For more on setting up DILs to IntraMail, see Having the Automated Attendant Answer Outside Calls on
page 11.
Options
■ Answer Table (1-8)
Default
✔ 1 (Answer Table 1)
47-10 Program Entry
47-10: IntraMail Trunk Options
(Entry Range) [Default Setting]
CALL1 + #*#* + Password (12345678) + HOLD + 4710 + Option.
There are 8 available trunks (1-8).
01 Answer Table (1-8) [1]
Press this: To do this:
Editing
HOLD
Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
-1 +1
Scroll backwards (-1) or forwards (+1) through the list of available entries.
←←
←←
→→
→→
When editing an entry, moves the cursor left or right.
CONF
When editing an entry, delete the character to the left of the cursor.
CLEAR
When editing an entry, CLEAR erases the entire entry from the display.
Line Keys (LK)
Where indicated, press a line key to enter a specific value for the selected option.
Navigation
FLASH
FLASH + Trunk number + FLASH selects a new trunk.
MSG or back
Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
➔
➔
Scroll consecutively backwards or forwards through selected Option or Series.
select
Selects currently displayed Option or Series
To Next Page
Loading...