EasyManua.ls Logo

NEC Aspire S IntraMail - 47-13-01: Dial Action Table Actions; TRF Action - Screened Transfer (1)

NEC Aspire S IntraMail
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program 47: IntraMail
47-13: IntraMail Dial Action Tables
236 Chapter 3: Programming IntraMail for Aspire System Guide
Note: TIMEOUT provides the routing for rotary dial callers. See Automatic Routing for Rotary Dial Callers
on page 51 for more.
47-13-01: Dial Action Table Actions
TRF Action - Screened Transfer (1)
(TRF)
Use this action to allow an Automated Attendant caller to place a Screened Transfer to an extension. After an
Automated Attendant caller dials an extension, IntraMail calls (screens) the destination to see if the transfer
can go through.
If the destination is available, the Automated Attendant rings it. If the destination answers, the call
goes through.
If the destination doesn’t answer within a preset interval, is busy, or is in Do Not Disturb, the Auto-
mated Attendant doesn’t extend the call. It then provides the caller with additional options.
Number Option
Normally, the corresponding Number option should be XXX. Note that the key you choose for this
action is the rst digit of the called extension number.
- For example, to allow callers to place Screened Transfers to extensions 301-399, for key 3 enter
TRF for the Action and XXX for the corresponding Number.
To have Screened Transfer call a specic extension, the corresponding Number option should be that
extension’s number. The caller then dials that single digit to reach the extension.
Dial Action Table Default Settings
Key Dial Action Table 1 Dial Action Tables 2-16
1 UND
(Undened)
UND
(Undened)
2 UND
(Undened)
UND
(Undened)
3 UTRF to XXX
(Unscreened Transfer to user-dialed extension)
UND
(Undened)
4 UTRF to XXX
(Unscreened Transfer to user-dialed extension)
UND
(Undened)
5 UND
(Undened)
UND
(Undened)
6 UND
(Undened)
UND
(Undened)
7 UND
(Undened)
UND
(Undened)
8 UND
(Undened)
UND
(Undened)
9 HNGUP
(Hangup)
UND
(Undened)
0 UTRF to 301
(Unscreened Transfer to 301)
UND
(Undened)
* REC1 to IXXX
(Quick Message with greeting to
user-dialed extension)
UND
(Undened)
# LOGON to IXXX
(Logon to user-dialed mailbox)
UND
(Undened)
TIMEOUT UTRF to 301
(Unscreened Transfer to 301)
UND
(Undened)

Table of Contents

Related product manuals