EasyManua.ls Logo

NEC Aspire S IntraMail - Log Onto Voice Mail (Page 107)

NEC Aspire S IntraMail
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Log Onto Voice Mail
108 Chapter 2: Features IntraMail for Aspire System Guide
Programming
Step 1 To log onto a mailbox through the Automated Attendant:
1.1 47-13-01: Dial Action Table Actions: LOGON Action - Log Onto Voice Mail (5) on page 238.
- To log directly into a specic Subscriber Mailbox, enter the mailbox number in the corre-
sponding Number option.
- For example, to have key 4 log directly into
Subscriber Mailbox
305, for key 4 enter
LOGON for the Action and 305 for the corresponding Number.
- To have IntraMail request Automated Attendant callers to select a Subscriber Mailbox to
log into, enter N in the corresponding Number option. The key you choose must represent
the rst digit in the Subscriber Mailbox numbers.
- For example, to have the Automated Attendant request callers to enter the number of
the
Subscriber Mailbox
into which they wish to log, for key 3 enter LOGON for the
Action and N for the corresponding Number. When callers dial 3, they hear, “Please
enter your mailbox number.
- To have IntraMail require Automated Attendant callers to enter a
Subscriber Mailbox
to log
into (without playing an announcement), enter XXX in the corresponding Number option.
The key you choose must represent the rst digit in the Subscriber Mailbox numbers.
- For example, to allow callers to log onto mailboxes 301-399, for key 3 enter
LOGON for the Action and XXX for the corresponding Number.
- To enter an X, press LK2.
- To log into any valid Subscriber Mailbox, enter IXXX in the corresponding Number
option.
- For example, to allow callers to dial 1 plus any Subscriber Mailbox number to log
on, for key 1 enter LOGON for the Action and IXXX for the corresponding Number.
- To enter an I, press LK3.To enter an X, press LK2.
-
See
Automated Attendant on page 47
for more on how to set up IntraMail to answer out-
side calls.
By default, key # Action = LOGON and Number = None.
Operation
Logging Onto Your Mailbox
To log onto your Subscriber Mailbox:
1.
Press MSG.
From an on-premise single line telephone, lift handset and dial *8.
To log onto your Guest Mailbox or your Subscriber Mailbox from a co-worker’s extension:
1.
Press an idle CALL key + Dial the IntraMail master number (e.g., 700) + Dial your mailbox number.
To log onto your Subscriber Mailbox from the Automated Attendant:
1.
Wait for the Automated Attendant to answer.
2. Dial # and your mailbox number.
This option may be different in your system. Check with your Communications Manager.
After you remotely log onto your mailbox, you can optionally dial
9
then
*
to return to the Automated Attendant.

Table of Contents

Related product manuals