Installation
Installing the IntraMail PCB
8 ◆ Chapter 1: Quick Setup IntraMail for Aspire System Guide
Step 3 Check the IntraMail LED(Figure 8: Checking LED2).
- Once the system powers up, check LED2 on the IntraMail PCB.
-
LED2 should blink quickly once every 3 seconds.
Figure 8: Checking LED2
Replace the Front Cover
When the system is powered up and running normally, you can reinstall the front cover.
Step 1 Position the front cover (Figure 9: Reinstalling the Front Cover).
- Line up the hooks on the front cover with the slots in the cabinet.
- Insert the front cover.
Figure 9: Reinstalling the Front Cover
0893100 - 161
0893130
-
3
Hook
Hook
Front Cover
To Next Page
Loading...