Installation
Installing the IntraMail PCB
IntraMail for Aspire System Guide Chapter 1: Quick Setup ◆ 9
1
Step 2 Close and resecure the front cover (Figure 10: Closing the front Cover).
- Close the front cover.
- Firmly retighten the 4 captive screws.
Figure 10: Closing the front Cover
Step 3 Verify IntraMail Operation.
- After the system restarts, go to extension 301 and press MSG.
- You should immediately log into that extension’s mailbox and hear the voice prompt, “You have no
new messages.”
0893130-
4
To Next Page
Loading...