Program 47: IntraMail
47-01: IntraMail System Options
IntraMail for Aspire System Guide Chapter 3: Programming ◆ 193
3
Program 47: IntraMail
47-01: IntraMail System Options
Description
Use Program 47: IntraMail System Options to set up the IntraMail system-wide options.
Options
47-01-01: DSPDB Voice Mail Type
(DSPDB VM Type)
Use this option to enable the IntraMail PCB. Enter 0 for this option when IntraMail is installed.
Options
■ 0 (IntraMail)
■ 1 (PVMU - Not available in North America)
Default
✔ 0 (IntraMail)
47-01-02: IntraMail Master Name
(MasterName)
Use this option to modify the name for all IntraMail ports. The system briefly displays this name when a dis-
play keyset user calls a Voice Mail port (either by pressing
MSG, their voice mail key, or by dialing the mas-
ter number). You should always end the name with the ## characters. The system substitutes the port number
for the last #. Using the default name IntraMail ## for example, the keyset display shows IntraMail #1 when
calling port 1.
■ See Start-Up Programming on page 6 for more on IntraMail installation and startup.
Options
■ See Keys for Entering Names below.
■ Consider leaving the option at its default setting.
Default
✔ IntraMail ## (The system substitutes the port number for the # when calling the port).
To Next Page
Loading...