Program 47: IntraMail
47-08: Call Routing Mailbox Options
IntraMail for Aspire System Guide Chapter 3: Programming ◆ 219
3
47-08: Call Routing Mailbox Options
Description
Use 47-08: Call Routing Mailbox Options to set the options for mailboxes assigned as Call Routing Mail-
boxes in 47-07-02: Routing Mailbox Type.
■ See Call Routing Mailbox on page 54 for more.
Options
47-08-01: Dial Action Table
(Dial Action Table)
Use this option to assign the Dial Action Table to the Call Routing Mailbox. The Dial Action Table defines
the dialing options for the call Routing Mailbox.
■ See Call Routing Mailbox on page 54 and Dial Action Table on page 62 for more.
Options
■ 1-16 (Dial Action Table 1-16)
Default
✔ 1 (Dial Action Table 1)
47-08-02: Screened Transfer Timeout
(Scrn Trf Timeout
Use this option to set how long a Screened Transfer (TRF) from the Automated Attendant will ring an unan-
swered extension before recalling.
■ This option has a similar function as Customize: Mailbox Options: Call Routing: [Call Handling]
Options: Delay Rings Before Redirect Transfer in Aspire Mail.
■ 0-255 seconds
- Entering 0 causes immediate recall.
Default
✔ 15 seconds
47-08-03: Time Limit for Dialing Commands
(Dialing Timeout)
This option determines how long IntraMail will wait for an Automated Attendant caller to dial before routing
the call to the Timeout destination.
■ Be sure your Dial Action Tables have a Timeout action programmed.
■ See Call Routing Mailbox on page 54 and Dial Action Table on page 62 for more.
If the caller waits too long to dial:
■ When the associated Dial Action Table has a Timeout action programmed, the caller routes to that des-
tination.
■ When the associated Dial Action Table does not have a Timeout action programmed, the Instruction
Menu repeats 3 times and then IntraMail hangs up.
Options
■ 0-99 seconds
- Entering 0 causes the Automated Attendant to immediately route callers to the Timeout destination
programmed in the active Dial Action Table.
Default
✔ 5 seconds
To Next Page
Loading...