NEC Aspire S IntraMail - 47-01-05: Message Backup;Go Ahead Time; 47-01-06: Fax Extension; 47-01-07: Digital Pager Callback Number

Program 47: IntraMail
47-01: IntraMail System Options
IntraMail for Aspire System Guide Chapter 3: Programming ◆ 195
3
■ Automated Attendant callers leaving a message or Quick Message in a Subscriber Mailbox.
■ Outside callers transferred by an extension user to a Subscriber Mailbox.
See the following for more:
■ Automated Attendant on page 47.
■ Message Length on page 125.
■ Quick Message on page 148.
■ Subscriber Mailbox on page 162
Options
■ 1-4095 seconds.
Default
✔ 120 seconds.
47-01-05: Message Backup/Go Ahead Time
(Msg Bkup/Adv Time)
Use this option to set the backup/go ahead interval. This interval sets how far IntraMail backs up when a user
dials
B while listening to a message. This interval also sets how far IntraMail jumps ahead when a user dials
G while listening to a message.
See the following for more:
■ See Listening to Messages on page 104.
■ Message Length on page 125.
Options
■ 1-60 Seconds.
Default
✔ 5 Seconds.
47-01-06: Fax Extension
(Fax Extension)
Use this option to specify which system extension is the fax machine. When the Automated Attendant
answers a call and detects fax (CNG) tone, it automatically transfers the call to this extension.
■ See Fax Detection on page 80 for more.
Options
■ No entry (Press CLEAR).
■ Extension number (e.g., 310).
Default
✔ No entry (Press CLEAR).
47-01-07: Digital Pager Callback Number
(Pager CBack)
Use this option to set the Digital Pager Callback Number portion of the Message Notification callout num-
ber for a digital pager. This is the portion of the callout number that is appended to the pager service tele-
phone number. Normally, this option should be X*M#, where:
- X is the number of the extension that generated the notification.
- * is a visual delimiter (to make the pager display easier to read).
- M is the number of new messages in the extension’s mailbox.
- # is the digit normally used by the pager service for positive disconnect.
■ See Message Notification on page 127 for more.
Options
■ Digits (12 maximum, using 0-9, # and *)
■ M (Number of messages - entered by pressing LK1)
■ No entry (Entered by pressing CLEAR).
■ X (Extension number - entered by pressing LK2)
IntraMail automatically replaces the X command with the number of the extension that initially
received the message.