Program 47: IntraMail
47-01: IntraMail System Options
IntraMail for Aspire System Guide Chapter 3: Programming ◆ 199
3
47-01 Program Entry
47-01: IntraMail System Options Program Entry
(Entry Range) [Default Setting]
CALL1 + #*#* + Password (12345678) + HOLD + 4701 + Option.
01 DSPDB VM Type (0=IntraMail, 1=PVMU) [0]
LK1=Intra, LK2=PVMU
02 IntraMail Master Name (See Keys for Entering Names on page 194) [IntraMail ##]
03 Subs Msg Length (1-4095) [120]
04 Mbox Msg Length (1-4095) [120]
05 Msg Bkup/Adv Time (1-60) [5]
06 Fax Extension (Extension number or no entry (entered by pressing CLEAR)) [No entry]
07 Pager CBack (Digits, M=Number of messages, X=Extension number) [X*M#]
LK1=M, LK2=X
08 Pager Dial Delay (0-99) [9]
09 Notify Pager Intvl (1-255) [15]
10 Notify N-Pgr intvl (1-255) [20]
11 Notify Busy Intvl (1-255) [15]
12 Notify RNA Intvl (1-255) [30]
13 Notify RNA Rings (1-99) [5]
14 Notify Call Attmpt (1-99) [5]
15 Retry Until Ack (1=Yes - enabled, 0=No - disabled) [0]
16 Name Format (0=First-Last, 1=Last-First) [0]
Press this: To do this:
Editing
HOLD
Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
-1 +1
Scroll backwards (-1) or forwards (+1) through the list of available entries.
←←
←←
→→
→→
When editing an entry, moves the cursor left or right.
CONF
When editing an entry, delete the character to the left of the cursor.
CLEAR
When editing an entry, CLEAR erases the entire entry from the display.
Line Keys (LK)
Where indicated, press a line key to enter a specific value for the selected option.
Navigation
MSG or back
Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
➔
➔
Scroll consecutively backwards or forwards through selected Option or Series.
select
Selects currently displayed Option or Series
To Next Page
Loading...