Auto Erase or Save
IntraMail for Aspire System Guide Chapter 2: Features ◆ 45
2
Auto Erase or Save
Description
When a
m
ailbox user completely listens to a new message and then exits their mailbox, IntraMail will either
automatically save or erase the message. The setting of this option depends on how the subscriber would pre-
fer their mailbox to operate. When set to erase, the subscriber can review their messages and retain only those
they specifically save using the
SA
option. This is a good choice for a subscriber that receives frequent unes-
sential messages. When set to save, the subscriber has the assurance of knowing that every message they lis-
tened to was saved in their mailbox. This is a good choice for those that must carefully review and consider
each new message.
Notes:
■ If a subscriber’s mailbox is set to Auto Save messages, IntraMail saves partially listened-to messages
but does not relamp the keyset for those messages. For example:
- A subscriber with new messages calls their mailbox.
- The subscriber presses L to listen to a portion of each message and then exits their mailbox.
- IntraMail saves all the messages and turns off the message waiting lamp.
■
If you hang up while listening to a new message, IntraMail automatically retains the message as a
new message.
Related Features
N/A
Programming
Step 1 To set up Auto Erase or Save for a Subscriber Mailbox:
1.1 47-02-05: Auto Erase/Save of Messages on page 201.
- Select
1 (Save) to save the message; 0 (Erase) to erase the message.
✔By default, the Subscriber Mailbox will save (1) the message.
Operation
N/A
To Next Page
Loading...