System Re-initialization
168 ◆ Chapter 2: Features IntraMail for Aspire System Guide
Programming
Step 1 To initialize (Cold Start) the telephone system:
1.1 Make sure the system (not IntraMail) CompactFlash card is not installed.
- The system will not boot correctly if the system CompactFlash card is installed.
1.2 Be sure LED LD2 is flashing green 1/2 second on and 1/2 second off.
1.3 Push the power button to OFF.
1.4 Wait 10 seconds before going to the next step.
- This gives the system time to complete the shutdown process.
1.5 Press and hold the LOAD button, then turn the power switch to ON.
1.6 Continue to hold down the LOAD button for at least 3 seconds.
1.7 Release the LOAD button.
1.8 The system will restart in about 2 minutes.
- When the system restarts, LED
LD2 will flash green 1/2 second on and 1/2 second off.
0893100-167
LD2
LD4
LD3
LD1
To Next Page
Loading...